PRODUCT CENTER

Is a production and sales of aluminum coil, aluminum plate, embossed aluminum plate, aluminum foil, aluminum rod, aluminum tube, aluminum corrugated roofing board, color coated aluminum coil and other products of large-scale manufacturers;

5052 H112 round aluminum bar

5052 H112 round aluminum bar is a type of aluminum product, and the melting and casting process of aluminum rod includes melting, purification, impurity removal, degassing, slag removal, and casting. According to the different metal elements contained in aluminum rods, they can be roughly divided into 8 categories. Aluminum round rod is an aluminum rod with a circular shape.

4006 T8 round aluminum bar

4006 T8 round aluminum bar american wrought aluminum and aluminum alloy. Aluminum alloys are divided into two categories: cast aluminum alloys, which are used in the cast state; deformed aluminum alloys, which can withstand pressure processing and have higher mechanical properties than the cast state. It can be processed into aluminum alloy materials of various shapes and specifications. It is mainly used in the manufacture of aviation equipment, daily necessities, doors and windows for construction, etc.

5083 H24 aluminum tube

5083 H24 aluminum tube is a type of non-ferrous metal tube, which refers to a metal tube like material that is extruded and processed into a hollow longitudinal length using pure aluminum or aluminum alloy. The shape of the tube is circular.It is a high-strength hard aluminum that can undergo heat treatment and strengthening. It has moderate plasticity under annealing, hard quenching, and hot conditions, and good spot welding weldability.

8021-O Aluminum foil

The main components of 8021-O Aluminum foil are iron and silicon, 8021-O Aluminum foil material, special process, can greatly improve the elongation of aluminum foil, generally used as deep drawing material. It has excellent moisture resistance, light shading and high barrier capacity. Its chemical composition is silicon at 0.15, iron at 1.2-1.7, copper at 0.05, and zinc at 0.1. Aluminum foil after compounding, printing, and gluing is widely used as packaging materials.

7a04 H16 Aluminum coil

7a04 H16 Aluminum coil form a thin layer of aluminum oxide with a thickness of 5-20 microns on the surface. The hard anodized film can reach 60-200 microns. The anodized aluminum coil improves its hardness and wear resistance, up to 250-500kg/square millimetre, with good heat resistance. The melting point of the hard anodized film is up to 2320K, with good insulation, and the breakdown resistance voltage is up to 2000V, enhancing the corrosion resistance ω= 0.03NaCl salt spray does not corrode for thousands of hours. The thin oxide film contains a large number of micropores and can adsorb various lubricants, making it suitable for manufacturing engine cylinders or other wear-resistant parts; This membrane has strong microporous adsorption ability and can be colored into various beautiful colors. Non ferrous metals or their alloys (such as aluminum, magnesium, and their alloys) can undergo anodizing treatment.

2A12 T651 Aluminum coil

2A12 T651 Aluminum coil form a thin layer of aluminum oxide with a thickness of 5-20 microns on the surface. The hard anodized film can reach 60-200 microns. The anodized aluminum coil improves its hardness and wear resistance, up to 250-500kg/square millimetre, with good heat resistance. The melting point of the hard anodized film is up to 2320K, with good insulation, and the breakdown resistance voltage is up to 2000V, enhancing the corrosion resistance ω= 0.03NaCl salt spray does not corrode for thousands of hours. The thin oxide film contains a large number of micropores and can adsorb various lubricants, making it suitable for manufacturing engine cylinders or other wear-resistant parts; This membrane has strong microporous adsorption ability and can be colored into various beautiful colors. Non ferrous metals or their alloys (such as aluminum, magnesium, and their alloys) can undergo anodizing treatment.

7075 T651 Aluminum plate

7075 T651 Aluminum plate belongs to Al-Zn-Mg-Cu super duralumin .7075 T651 Aluminum plate is anultra-high-strength wrought aluminum alloy that has been used in the aircraft manufacturing industry in the late 1940s   and is still widely used in the aviation industry It is characterized by good plasticity after solution treatment, particularly good heat treatment strengthening effect, high strength below 150°C, and particularly good low-temperature strength; poor welding performance; tendency to stress corrosion cracking; needs to be coated with aluminum or other Protected processing use. Dual-stage aging can improve the alloy's ability to resist stress corrosion cracking. Zinc is the main alloying element in 7075 T651 Aluminum plate. Adding magnesium to an alloy containing 3%-7.5% zinc can form MgZn2 with a significant strengthening effect, making the heat treatment effect of the alloy far better than that of the aluminum-zinc binary alloy. Increasing the content of zinc and magnesium in the alloy will further increase the tensile strength, but its ability to resist stress corrosion and exfoliation corrosion will decrease accordingly. After heat treatment, it can achieve very high strength characteristics. 

5A06 H18 Aluminum veneer

5A06 H18 Aluminum veneer refers to a building decoration material that is processed by chrome treatment and then fluorocarbon spraying technology. Fluorocarbon coatings mainly refer to polyvinylidene fluoride resin (KANAR500), which is divided into three types: primer, topcoat, and varnish.The spraying process is generally divided into two coats, three coats, or four coats. Fluorocarbon coatings have excellent corrosion resistance and weather resistance, which can resist acid rain, salt mist, and various air pollutants. They have excellent cold and hot resistance, can withstand strong ultraviolet radiation, and can maintain long-term color fastness and powder resistance, with a long service life.

ABOUT US


Qingdao Xincaifa New Material Co., Ltd. is located in Shibei District of Qingdao City, Shandong Province, China, is a production and sales of aluminum coil, aluminum plate, embossed aluminum plate, aluminum foil, aluminum rod, aluminum tube, aluminum corrugated roofing board, color coated aluminum coil and other products of large-scale manufacturers,Products sell well in Europe, America, South America, Africa, the Middle East and other countries and regions.

EXCELLENT QUALITY

A wide variety of products, excellent quality, reasonable price, fashion design, widely used in printing and platemaking, transportation, containers, architectural decoration, , energy and other industries

MARKETING

Products sell well in Europe, America, South America, Africa, the Middle East and other countries and regions.Warmly welcome new and old customers at home and abroad to visit and negotiate!

COOPERATIVE PARTNER

图片名称

Factory Appearance

图片名称

Factory Appearance

图片名称

Factory Appearance

图片名称

Factory Appearance

NEWS CENTER